FORXAI Mirror manual
Welcome to the FORXAI Mirror setup and deployment manual. Here, you can find all information necessary to deploy the FORXAI Mirror on customer site.
Documentation
Quick start guide
This quick start guide will help you get up and running with the FORXAI Mirror in a few simple steps.
Connect Mirror to the network
This section explains how to connect the FORXAI Mirror device to the customer network. You can choose between two connection methods: Connect via Ethernet (w...
Connect to Mirror from your PC
This guide explains how to connect to the FORXAI Mirror.
User Login
To log in to FORXAI Mirror, follow these steps: Use a device connected to the same network as the Mirror. Open a web browser and enter the following address....
Activate License
The following article describes how to activate the FORXAI Mirror software license, and how to renew it when it expires. Prerequisites You can activate the l...
Configure the PPE settings
This section explains how to configure PPE (Personal Protective Equipment) detection to ensure the system checks for required safety gear. To configure the P...
Set the time zone
This article describes how to configure the time zone of the Mirror. Only perform the following procedure if the Mirror is in a different time zone from CET/...
ADAM-6060
This article describes how to connect the ADAM-6060 device to the FORXAI Mirror. The Advantech ADAM-6060 is a part of the ADAM-6000 series, which consists of...
Release notes
v2.4.0 v2.3.1 v2.3.0 v2.2.1 v2.2.0 v2.1.3 v2.1.2 v2.1.0 v2.0.0 v1.1.0 v1.0.0